Horse Chestnut Spiders

When I was little, one of my favorite things to do was create critters out of acorns and horse chestnuts. With help of an awl and some match sticks, we would bring all sorts of animals to life. Now that I have a child of my own, I want to pass these simple nature crafts on to her. Unfortunately I have a hard time finding horse chestnuts here in the US. Acorns a plenty, but chestnuts not so much.

Imagine my delight when I stumbled onto some chestnuts the other day when Lola and I were searching one of Milwaukee’s parks for tiny doors. Not only did we find two of the three doors hidden in Humboldt Park, we also found a plethora of nature’s craft goodies. Sycamore tree bark, beech tree nuts, acorns and acorn caps in every size imaginable, and of course, horse chestnuts.

To make horse chestnut spiders, you need just a few things:

• horse chestnuts
• pipe cleaners in the color of your choice
• awl and/or hand drill
• wire cutters and pliers
• glue
• beads for the eyes
  
  

Start by poking holes in the chestnut, four on each side. I used my awl for this but found that it was easier to use a small hand drill because my horse chestnuts had dried out and were quite hard. If I had made these spiders as soon as I found the chestnuts, it would have been easier.



Next up are the spider's legs. For one spider, you’ll need two pipe cleaners, one for each leg. Cut the pipe cleaner in four pieces using your wire cutters. Because pipe cleaner points are sharp, I always bend the tip back with my needle nose pliers.

Working on one side at a time, drop a little glue in each hole. I used Scotch Quick Dry Adhesive. It’s perfect for working with paper but glues chestnuts and pipe cleaners just as well. It dries clear, which I like.



Insert the legs in the holes and let dry. Once the glue is dry, bend the legs upwards from the body just a little, and then bend them in an angle about halfway down the leg. Glue on two little beads for eyes and you’re all set.



Lola and I created several spiders which we used in our #spookyspace that we made as part of Jo-Ann Fabric and Craft Stores’ Celebrate the Season campaign. You can read all about that here. There is a 50% OFF coupon to use at Jo-Ann's this month, too!



I will be linking up my spiders at:
Friday's Nature Table at The Magic Onions
Pin Me Linky Party at Diana Rambles
Creative Friday at Natural Suburbia
The Humble Brag at One Project Closer
Happy Hour Projects

Spooky Space

Lola and I were tickled orange when Jo-Ann Fabric and Craft Stores asked us to participate in the Celebrate The Season Campaign by creating a #spookyspace for Halloween. Our original plan was to turn Lola’s woodlands bedroom into a spooky forest, but our stairwell is painted in such a lovely pumpkin orange, I couldn’t possibly pass that up as a back drop to my spooky space.



Since I could not use the tree in Lola’s room, my first order of business was to find a nicely sized dead tree. There happened to be one available on the roof deck, but any large branch would have done just as well. After cleaning the smaller branches up a bit, I brought it inside. I considered spray painting it, but rather liked the gray so I left it as it was.

Spooky spaces always have spider webs. I created one with 16 and 22 gauge wire. I started by cutting four 12” lengths of the heavier wire. To prevent poking anyone’s eyes out, and because I like the look, I curled the ends of the spokes before I weaved the thinner wire around them. To make it easier to work with, I cut the 22 gauge wire into roughly 3’ lengths. I needed about four of those.



Again, I thought about spray painting the spider web, but felt it looked perfect as it was. Some might consider this laziness, but I am all about aesthetics, honestly. After attaching the spider web to the branches with wire, I hung five cute little fleece crows, found at Jo-Ann, in our spooky tree, along with some cheese cloth ghosts from Halloweens past.



One of my favorite things to do, is make garlands with felt cut-outs. For this I use my trusted Cuttlebug® die cutting machine and Sizzix Bigz dies. I love these dies because they cut though fabric as though it were butter. The Cuttlebug® works with every brand die, so if you’re thinking about buying one, that is the one I would recommend.

I found some lovely suiting fabric in the remnant bin at Jo-Ann’s which I paired up with black wool felt. I affixed them to each other with Heat’n Bond Lite. It bonds really well while still allowing for sewing. By ironing the two fabrics together, it also takes care of any fraying edges. After creating my double layer, I cut the fabric into smaller pieces and ran them through the Cuttlebug®.



For this particular garland I used Tim Holtz’s tattered leaves die. From the pile of leaves I cut, I was able to sew two 6’ garlands. Nothing special, just line up the leaves and sew them together with a straight stitch, leaving about an inch of thread in between.

Once the garlands were finished, it was time to stage our #spookyspace. I found two beauty school heads at a thrift store a long time ago, and wrapped one in gauze. Though it’s not new, my Halloween Wreath was brought out as well since it is still one my all time favorite decorations. It looks really good against the metal door.



Lastly, I threw in a pumpkin or two, some rubber mice, a few horse chestnut spiders, and our spooky space was complete. I hope the neighbors like it, too.



If you’re feeling crafty and are looking for inspiration, take a look at Jo-Ann’s Celebrate The Season and Simply Spooktacular websites. What’s more, here is a 50% off coupon for you. Enjoy!

I was compensated by Jo-Ann for writing this post. However, the opinions expressed in this review are my own.

Creating A Forest – Part 1

When we moved to Milwaukee, I promised Lola a cool room. She deserved it. She had a very tiny one up north and we never got around to doing something fun with it. It was her turn now, we all felt. Especially after Ryan and I confiscated a large corner of her room to store our surplus of bins in lieu of an attic or a basement. (We are a bit strapped for storage here.)

She told me she wanted a jungle or a forest. And so one day she and I sat down together, and envisioned her forest. We decided we were going to build a tree on the brick wall and change out the leaves every season. She also wanted apples in her tree. The plan was to use craft paper and somehow attach that to the wall. But then I saw these in the alley behind our building:



Ten feet long cardboard tubes, perfect for building a tree. And for the first time in my life, I exchanged my trash for someone else’s. Armed with my extra long tube, I made it up two flights of stairs and enlisted my husband and his friend to cut the tube in half lengthwise.





After cleaning up the edges with some sandpaper, I cut a hole into the tree trunk with a jigsaw to accommodate future critters and/or elves, fairies, and possibly gnomes.

To attach the tree to the wall, I used small corner brackets that I fastened on the inside of the trunk, like so:



The only think I did not like about this solution was the sharp end of the screw sticking out. While this tree does not have to be perfect, and holes are okay, I don’t want it to be a hazard. So after I screwed the hole in the cardboard, I switched out the pointy screw for a blunter version.



Then it was only a matter of drilling holes in the wall and attaching my branches.



Not bad, huh? I would like a few more branches and stumps but I ran out of cardboard. Time to head back to the alley. Stay tuned for more forest construction.



I am linking my tree construction project up at:
Friday's Nature Table at The Magic Onions
Pin Me Linky Party at Diana Rambles
Creative Friday at Natural Suburbia
One Project Closer at The Humble Brag
Shine On Friday at Happy Go Lucky
Happy Hour Projects

Owls In The Shop

Sewing owl pillows is one thing, listing them in my Etsy shop is quite another. There are photographs to make, pictures to edit, listings to write, etc. It’s time consuming and therefore easily put off.

Yesterday morning I finally sat down and finished what I had started. I listed three owl pillows and one Valentine’s Day garland in my shop. Lola and I decided to name the owls from now on and she picked the names for the first batch, with a little direction from me, I’ll admit.

Meet Nathan, Leslie, and Flower. They are for sale right here.

Sister Owls

Custom orders are such fun, I've decided. I received a request for two sets of colorful sister owl pillows from my friend S. She wants to give them to her four nieces for Christmas. I very much liked that idea but I didn't quite know what to do about the colorful bit at first.

I work mostly with felt and wool. While craft felt can be bought in every color imaginable, it does not hold up well on pillows, I find. It pills. Wool felt or a wool/rayon blend is better, but the by-the-yard stuff I can only find at Jo-Ann's in limited colors, mostly naturals. I didn't feel like special ordering wool felt online for an arm and a leg. I found a few wool sweaters at the Goodwill but the yarn was so thick, they wouldn't felt.

But then I thought of using fleece and a world of colorful possibilities opened up. Our local Wal-Mart has the best selection of funky fleece at the moment, better than Jo-Ann's even. Finished with an old wool blanket, vintage doilies, and felt eyes and a beak, these lovely bright colored ladies were on their way to New England in time for Christmas.

I am on a roll now, cutting and sewing owl pillows in an array of colors and patterns: navy blue with green circles, brown and green argyle, bright pink with multicolored flowers, and warm brown plaid. I have made them a little chubbier, too.  I found a few more old blankets at the thrift store and some doilies as well. Look for them in the shop soon.

I am linking my owls up with Natural Suburbia's Creative Friday and
Friday's Nature Table at The Magic Onions.

Leaves For Thanksgiving

I finished my very first custom order last night. A set of oak leaf place cards and a leaf garland to match. It's a hostess gift for a Thanksgiving dinner party. My friend S. asked me to make them after she saw my booth at our Fall Festival a month ago. She came over to my house and we picked out the fabric together but the design was left up to me.

The leaf place cards were cut by hand and sewn together two by two with a simple straight stitch. The little paper name tags will be taped to the leaf after the names have been written on them. Since S. is a big lover of acorns, I decided to add acorns to the tags. After three failed attempts to carve an acorn stamp myself, I broke down and ordered one on Etsy. It's perfect for this project.

She also asked me to make a garland to go with the place cards. Those leaves were cut with a die cutting machine. I hope S. likes the end result. I certainly do. So if she doesn't, no problem. I'll keep them for myself.

I am linking my leaves up with:
Friday's Nature Table at The Magic Onions
Creative Friday at Natural Suburbia

Owl Pillows

It was meant to be a fox. But somehow it turned into an owl. That’s okay, I like owls. So does Lola. I have been whipping out owl pillows all week. I put some in the shop, I made one for Lola to keep her company on our recent camping trip, and I am trying to figure out the best way to send one to my mom (look away, mom!) for her birthday.

They’re about 18 – 19” tall. I just freehanded the pattern. They are made of a combination of wool, felt, sheepskin fabric, gingham, flannel, and vintage doilies. They have tagua-nut buttons as noses and regular buttons for eyes. Lola insisted on adding a strawberry for a belly button to her owl.

I love my owls. When they’re sitting all huddled together in the big chair, I find it hard to part with them. And it’s a excellent stash buster, too!

Happy Friday, everyone. Hope your weekend is a wonderful one. Whoo hoo!

I am linking my owls up at:

Friday’s Nature Table at The Magic Onions
Creative Friday at Natural Suburbia

Woodland Felt Block Tutorial

Nothing pleases me more these days, than hearing of a new baby arriving. And not just because babies are so sweet, cuddly, and full of promise, but also because it gives me a legitimate reason to design and sew a new felt project.

There is a little boy on the way. From stalking his parents’ Facebook page, I have concluded his nursery will have something of a woodland theme. I saw a wooden wall somewhere and a big cardboard moose head came floating by in my newsfeed one day. I like woodland. I decided to make a felt block with woodland cut-outs.

My block measures 5” x 5” x 5”. I tried a few different things before I settled on using silhouettes only, cut from one piece of felt. No embroidery, no use of different felt colors. The cut-outs are approximately 2 to 2 1/2”.

For the side panels and the silhouettes, I used a mixture of hand died, multi-colored wool felt and a good quality craft felt. The soon-to-be-dad is an avid fisherman so naturally one side featured a fish. The others sides contain an acorn, a mushroom, a tree, a deer, and a maple leaf.

 

 

 

After cutting the felt, I attached the cut-outs by using a blanket stitch and a back stitch (for the deer’s antlers only). I sewed the four sides together, then attached the bottom piece, and ended with the top piece. I stuffed the block with very soft Poly-fill and a large jingle bell for the baby’s amusement.

That’s all there is to it. A soft felt block, suitable for a baby.

I hope it will be loved.