Horse Chestnut Spiders

When I was little, one of my favorite things to do was create critters out of acorns and horse chestnuts. With help of an awl and some match sticks, we would bring all sorts of animals to life. Now that I have a child of my own, I want to pass these simple nature crafts on to her. Unfortunately I have a hard time finding horse chestnuts here in the US. Acorns a plenty, but chestnuts not so much.

Imagine my delight when I stumbled onto some chestnuts the other day when Lola and I were searching one of Milwaukee’s parks for tiny doors. Not only did we find two of the three doors hidden in Humboldt Park, we also found a plethora of nature’s craft goodies. Sycamore tree bark, beech tree nuts, acorns and acorn caps in every size imaginable, and of course, horse chestnuts.

To make horse chestnut spiders, you need just a few things:

• horse chestnuts
• pipe cleaners in the color of your choice
• awl and/or hand drill
• wire cutters and pliers
• glue
• beads for the eyes
  
  

Start by poking holes in the chestnut, four on each side. I used my awl for this but found that it was easier to use a small hand drill because my horse chestnuts had dried out and were quite hard. If I had made these spiders as soon as I found the chestnuts, it would have been easier.



Next up are the spider's legs. For one spider, you’ll need two pipe cleaners, one for each leg. Cut the pipe cleaner in four pieces using your wire cutters. Because pipe cleaner points are sharp, I always bend the tip back with my needle nose pliers.

Working on one side at a time, drop a little glue in each hole. I used Scotch Quick Dry Adhesive. It’s perfect for working with paper but glues chestnuts and pipe cleaners just as well. It dries clear, which I like.



Insert the legs in the holes and let dry. Once the glue is dry, bend the legs upwards from the body just a little, and then bend them in an angle about halfway down the leg. Glue on two little beads for eyes and you’re all set.



Lola and I created several spiders which we used in our #spookyspace that we made as part of Jo-Ann Fabric and Craft Stores’ Celebrate the Season campaign. You can read all about that here. There is a 50% OFF coupon to use at Jo-Ann's this month, too!



I will be linking up my spiders at:
Friday's Nature Table at The Magic Onions
Pin Me Linky Party at Diana Rambles
Creative Friday at Natural Suburbia
The Humble Brag at One Project Closer
Happy Hour Projects

Spooky Space

Lola and I were tickled orange when Jo-Ann Fabric and Craft Stores asked us to participate in the Celebrate The Season Campaign by creating a #spookyspace for Halloween. Our original plan was to turn Lola’s woodlands bedroom into a spooky forest, but our stairwell is painted in such a lovely pumpkin orange, I couldn’t possibly pass that up as a back drop to my spooky space.



Since I could not use the tree in Lola’s room, my first order of business was to find a nicely sized dead tree. There happened to be one available on the roof deck, but any large branch would have done just as well. After cleaning the smaller branches up a bit, I brought it inside. I considered spray painting it, but rather liked the gray so I left it as it was.

Spooky spaces always have spider webs. I created one with 16 and 22 gauge wire. I started by cutting four 12” lengths of the heavier wire. To prevent poking anyone’s eyes out, and because I like the look, I curled the ends of the spokes before I weaved the thinner wire around them. To make it easier to work with, I cut the 22 gauge wire into roughly 3’ lengths. I needed about four of those.



Again, I thought about spray painting the spider web, but felt it looked perfect as it was. Some might consider this laziness, but I am all about aesthetics, honestly. After attaching the spider web to the branches with wire, I hung five cute little fleece crows, found at Jo-Ann, in our spooky tree, along with some cheese cloth ghosts from Halloweens past.



One of my favorite things to do, is make garlands with felt cut-outs. For this I use my trusted Cuttlebug® die cutting machine and Sizzix Bigz dies. I love these dies because they cut though fabric as though it were butter. The Cuttlebug® works with every brand die, so if you’re thinking about buying one, that is the one I would recommend.

I found some lovely suiting fabric in the remnant bin at Jo-Ann’s which I paired up with black wool felt. I affixed them to each other with Heat’n Bond Lite. It bonds really well while still allowing for sewing. By ironing the two fabrics together, it also takes care of any fraying edges. After creating my double layer, I cut the fabric into smaller pieces and ran them through the Cuttlebug®.



For this particular garland I used Tim Holtz’s tattered leaves die. From the pile of leaves I cut, I was able to sew two 6’ garlands. Nothing special, just line up the leaves and sew them together with a straight stitch, leaving about an inch of thread in between.

Once the garlands were finished, it was time to stage our #spookyspace. I found two beauty school heads at a thrift store a long time ago, and wrapped one in gauze. Though it’s not new, my Halloween Wreath was brought out as well since it is still one my all time favorite decorations. It looks really good against the metal door.



Lastly, I threw in a pumpkin or two, some rubber mice, a few horse chestnut spiders, and our spooky space was complete. I hope the neighbors like it, too.



If you’re feeling crafty and are looking for inspiration, take a look at Jo-Ann’s Celebrate The Season and Simply Spooktacular websites. What’s more, here is a 50% off coupon for you. Enjoy!

I was compensated by Jo-Ann for writing this post. However, the opinions expressed in this review are my own.

Gourds On A Hook

I love gourds. They make such colorful fall decorations. But rather than displaying them in a bowl, I wanted to do something different. What do you get when you cross Martha Stewart’s gourd garland with Better Homes and Gardens' jingle bells on a shepherd’s hook?

Gourds on a hook!

Simply drill a hole in the top of various small gourds and string some heavy gauge wire through it. Twist the ends and hang the gourds from black Dollar Tree shepherd's hooks.

They cheerfully line the path from the garage to the house.

I am linking my gourds up at Friday's Nature Table at The Magic Onions and Natural Suburbia's Creative Friday.

Fairy House

I stumbled onto a beautiful felt tree trunk Sunday morning while going through my reader at seven in the morning. Very, very impressive. It made me forget about all the projects I have in the works and develop a severe case of Craft ADD. I do not have the patience to take on such a project though. That's why I don't knit, it takes me too long to finish something and I lose interest.

But I did want to recreate that trunk, my way. Fortunately I had an alternative at hand in the shape of a pile of wood in my backyard. I figured I would cut some wood, clean it up, and concoct a way to attach the felt mushrooms (the Dutch fittingly call them 'fairy benches') to the stump. The mushrooms looked easy enough to make.

So there I was at 8 o'clock, sipping my coffee, eying up the branches and trying to decide which one to use. I pulled out the dead apple tree branch, deciding then and there to take advantage of its hollow core and turn it into a fairy house rather than a stump to use on our nature table. The roof I would make out of felt, and I would make interchangeable rooftops for the different seasons. I could totally picture it in my mind.

I wondered if it would disturb the church goers too much if I fired up the chainsaw to chop my fairy house to size. It didn't matter in the end because I couldn't get the smaller chainsaw to work and the large one didn't have a chain on it. Ryan wasn't there to help me out but I doubt he would have been willing at that hour.

With my trusted little hacksaw I silently cut off a piece of the apple branch and several more branches in various sizes to make toadstools with. Because what is a fairy house without toadstools? I took all the wood inside and baked in a 250 degree oven on a foil lined cookie sheet for about an hour. This gets rid of any bugs, a lesson I learned the hard way last year with my acorn collection.

Next I chiseled out the spongy stuff inside the branch, scrubbed it with a wire brush, cut a door with my jigsaw, and sealed the house with a clear top coat. The other branches I painted white. Meanwhile I sewed the toadstool tops and then hot glued them on.

I am truly in love with the results. I have already started working on another roof for the fairy house, a red and white polka dotted one per Lola's request. All that is left to make are the fairy bench mushrooms. And fairies, of course.

I am linking my fairy house up with A Little Birdie Told Me... at Rook No. 17 and Friday's Nature Table at The Magic Onions.

Christmas On The Front Porch

We have a large screened-in front porch that is only used in the summer. We always come in through the back door. Even the UPS guy and the repairmen know to go around back.

But the space is too lovely not to decorate for Christmas. The green and red of the branches from the backyard and the berries from across the road frame the gray and white of my vintage finds nicely.

Isn't it lovely? If the weather were a little nicer, I would sit out there all day.

Birdseed Ornaments

In my pantry sits a tub of lard I bought years ago. It was intended to make birdseed balls with. I am not really sure if lard is suitable for birds, though. Our local Piggly Wiggly sells beef suet by the log. They are ideal for making birdseed ornaments, although I guess you can just hang them outside as is. But where's the fun in that?

We melted the 22 oz. suet log over medium heat and stirred in three cups of birdseed. I set out three extra large cookie cutters partially wrapped in aluminum foil on a baking pan, as well as an assortment of little molds lined with plastic wrap. We poured in the melted suet/seed mixture and set the baking pan in the freezer.

After about two hours I took them out and let them thaw out just enough to make it easier to release the ornaments from the mold. I removed the little pieces of a drinking straw to make a hole and strung the ornaments on some butcher's twine. Aren't they lovely? I have already spotted a little chickadee munching on one.

Jingle Bells

Silver jingle bells on stakes adorn the path from the garage to the house. Just like me, they are waiting for snow. There is some in the forecast for the next two days.

When I first saw this idea on Pinterest, I immediately took off for the Dollar Tree to stock up on their extra large jingle bells. I knew I still some shorter shepherd's hooks in the shed. Or so I thought.

I had forgotten that a lot of the gardening stuff did not make it back to Wisconsin when we moved. Including the shepherd's hooks. And they are a little hard to come by this time of year.

Looking for an alternative, I found plant props, still available at home improvement stores. They are easy to bend to hang the jingle bell. Quick and easy, my kind of project.

I still feel something is missing though. Oh, that's right. Snow. And possibly a little winter greenery.

Doily Snowflake Ornaments

We are still waiting for snow up here in the Northwoods. But since the temperature has dropped to freezing, both day and night, I made my own snowflakes by freezing doilies in baking pans and hanging them in the trees in our backyard. It couldn't be more simple.

I used boiled water, cooled, because it results in clearer ice. The only tricky part is making a hole in the ice once the doilies have frozen. I used a hand drill but any sharp object will do. Just don't go too fast or push too hard. Thread the ornament with string and hang from a branch. Watch them sparkle in the sunlight. Beautiful.

I am linking up to A Little Birdie Told Me at Rook No. 17.

Frosty The Snowman

Inspired by a pin on Pinterest (which I could not trace to its creator - I'm sorry, I tried), I recreated Frosty the Snowman out of three grapevine wreaths, some burlap, and a piece of plywood cut in the shape of a top hat on the side of the garage. My daughter looked on from the upstairs window, giving me the thumbs up when I finished assembling him.

The wreaths are not tied together, I simply hammered nails into the wooden siding of the garage and hung them individually. I started with the bottom wreath and worked my way up. The scarf is also attached to the garage with a few small nails to keep it from blowing away. The top hat hangs from a cup hook screwed into the wall and is attached to the wreath with a little bit of floral wire.

And wouldn't you know it. Just minutes after finishing Frosty, it started to snow! A twist on "If you build it, they will come..."

This project was featured on  A Little Birdie Told Me... at Rook No. 17.